Electric saw Marathon M-N7 50 W

Compact electric saw MARATHON N7 in excellent quality / price ratio with its 40 000 rpm. The unit is a worldwide bestseller among electric saws and impresses with excellent performance parameters. The Marathon N7 micro motor, with its speed of up to 40,000 rpm and powerful torque of 4.5 Ncm, is suitable for heavier duty all-day operation. The compact Marathon N7 is equipped as standard with automatic overload protection, a dust-proof unit cover and a right/left rotation switch. Control is via the foot pedal, which can also be installed vertically. About the manufacturer. The Korean company has been known worldwide for its reliable motors and controls since 1976. SMT is certified according to ISO 9001, ISO 13485 and CE 93/42/EEC.

Warranty
12 months for the control unit
6 months for the handle

Technical data

• Model: MARATHON N7 (control unit)
• Maximum speed: 40000RPM
• Voltage: 110-220V/50-60Hz
• Power: 50W
• 4.5 Ncm
• 1,000-40,000 RPM

Dimensions:

• On unit (HxWxD): 8.8 x 11.5 x 14.7 cm
• Handle (L x W): 14.9 x 2.8 cm Weight: 1.6 kg

Set includes

• Control unit
• Handle
• Handle holder
• Pedal
• Silicone Handle Holder
• Instruction manual

USE AND MAINTENANCE:

Switch the direction of rotation only after FULLY STOPPING the motor and moving the FWD/REV button.

Always reduce speed to zero before changing nozzle.

Tip diameter is 2.35 mm, minimum length is 10 mm.

Do not use rusted or damaged tips as this can cause accelerated bearing wear.

Never insert a wet or dirty nozzle into the motor.

Always store the motor with the nozzle in place.

Avoid mechanical damage.

Never switch on the motor without the nozzle or attachment!

Never immerse or wash the motor!

Daily maintenance after operation:

Clean the external parts with a soft cloth and alcohol solution or with a vacuum cleaner.

Clean the exposed nozzle with a brush.

Periodic preventive maintenance:

Includes cleaning, adjusting, changing brushes, etc.

Frequency depends on intensity and operating conditions.

Recommended preventive maintenance for professional use - at least once every three months.

Cleaning should only be carried out by a qualified technician.

At the first sign of malfunction, immediately contact the physical store or the sales representatives of the Emocosmetics Group where the appliance was purchased.